Sportartikelen
...de complete keus
Oms Backplate Alu
€ 80.72
Oms Backplate Alu. OMS: Backplate / aluminium
- Materiaal: aluminium
- Gewicht: 0,9 kg
- Uitsparingen voor doorrijgen cilinderbanden
Oms Backplate Inox
€ 198.00
Oms Backplate Inox. OMS: Backplate / rvs
- Materiaal: RVS
- Gewicht: 2,5 kg
- Uitsparingen voor doorrijgen cilinderbanden
Apeks Back Plate Aluminium
€ 124.95
Apeks Back Plate Aluminium. Aluminium Back Plate
The backbone of any system - this cleverly designed back plate can be used with the webbed harness or inserted into the WTX Harness.
- Made of Aluminium 6061.
- Weighs approx 1lb 11oz (753g)
- 4 each upper and lower slots accommodate nylon cylinder bands so a single cylinder can be strapped directly to the plate. Having a series of 4 slots provides lateral stability of the cylinder that traditional 2 slot plates cannot.
- 3 holes at the top of the plate offer a range of height adjustments for the buoyancy cells and the cylinders. In addition, a corresponding lower center slot allows for lower band bolts that are misaligned.
- 2- wide crotch strap slot.
- Upper and lower perimeter holes along either side and holes along the bottom allow for the mounting of accessories.
- Textured, electro-plate finish and a laser-etched Apeks logo round out the look of the plate.
Apeks Back Plate Inox
€ 1394.00
Apeks Back Plate Inox. Stainless Steel Back Plate
The backbone of any system - this cleverly designed back plate can be used with the webbed harness or inserted into the WTX Harness.
- Made of 316 stainless steel.
- Weighs approx 5 lbs (2.2 kg).
- 4 each upper and lower slots accommodate nylon cylinder bands so a single cylinder can be strapped directly to the plate. Having a series of 4 slots provides lateral stability of the cylinder that traditional 2 slot plates cannot.
- 3 holes at the top of the plate offer a range of height adjustments for the buoyancy cells and the cylinders. In addition, a corresponding lower center slot allows for lower band bolts that are misaligned.
- 2- wide crotch strap slot.
- Upper and lower perimeter holes along either side and holes along the bottom allow for the mounting of accessories.
- Textured, electro-plate finish and a laser-etched Apeks logo round out the look of the plate.
Dive Rite Stainless Steel Backplate
€ 147.73
Dive Rite Stainless Steel Backplate. Greg Flanagan first invented the metal backplate using aluminum in 1979 for North Florida cave divers. He realized that a back-mounted buoyancy system gives a diver natural balance in the water, due to the divers center of gravity (tanks) being surrounded by the center of buoyancy (BC wings).
Plus, the diver gains a clean chest area with room for gear attachment points on the harness. Bill Hogarth Main went on to popularize the backplate and harness and dive purists who follow the DIR philosophy have come to embrace what is known today as the "Hogarthian Rig." Dive Rite began manufacturing backplates for the public in 1984 and pioneered 11-inch on center bolt spacing creating an industry standard that is still followed today. Northeastern wreck divers adapted the concept and began using a stainless steel backplate at six pounds in weight, it is ideal to counterbalance buoyancy characteristics of thick drysuit exposure protection.
Eleven-inch on center holes accommodate standard double tank bolt kits. Holes along the perimeter of the plate allow for mounting lights, pony bottles, lift bags and other accessories. One-inch and 2-inch slots permit divers choice of crotch straps.
Two 3/8-inch slots along the bottom are designed to fit screws for attaching lift bag sleeves, sidemount butt plates or other accessories. Two-inch slots along the center allow single-tank divers to use cam straps without a single tank adaptor. All edges are deburred to eliminate sharp edges and prevent abrasion to harness webbing.
Grade 304 stainless steel is passivated, which prevents oxidation.
Made in the U.S.A
# 5.5 lbs (2.5kg)
# 11-inch on center holes accomodate standard bolt kits
# Two 3/8 slots along the bottom are designed to fit assembly screws for attaching accessories.
# Center slots accommodate cam straps without a single tank adaptor
# One-inch and 2-inch slots permit divers choice of crotch strap
# Perimeter holes for mounting lights, pony bottles and lift bags
Dive Rite Alluminium Backplate
€ 939.00
Dive Rite Alluminium Backplate. Invented by Greg Flanagan in 1979 for North Florida cave divers.
Greg realized that a back-mounted buoyancy system gives a diver natural balance in the water, due to the divers center of gravity (tanks) being surrounded by the center of buoyancy (BC/ wings). In addition, the diver gains a clean chest area with room for gear attachment points on the harness.
Bill Hogarth Main went on to popularize the backplate and harness and dive purists who follow the DIR philosophy have come to embrace what is known today as the "Hogarthian Rig". Dive Rite began manufacturing backplates for the public in 1984 and pioneered 11-inch on center bolt spacing creating an industry standard that is still followed today.
Sturdy, yet lightweight, the aluminum backplate is ideal for twin backmounted steel tanks since additional weight from the plate is not necessary. Eleven-inch on center holes accommodate standard double tank bolt kits and holes along the perimeter of the plate allow for mounting lights, pony bottles, lift bags and other accessories.
One-inch and two-inch slots along the bottom permit divers choice of crotch straps. Two 3/8-inch slots along the bottom are designed to fit screws for attaching lift bag sleeves, sidemount butt plates or other accessories. Two-inch slots along the center allow single-tank divers to use cam straps without a single tank adaptor.
All edges are beveled to eliminate sharp edges and prevent abrasion to harness webbing. Anodized black aluminum.
Made in the U.S.A.
* Black, anodized 5052 Aluminum resists corrosion and abrasion.
* Highly polished with rounded upper corners to prevent abrasion to wing.
* One-inch and two-inch slots permit divers choice of crotch straps.
* Holes along the perimeter of the plate allow for mounting lights, pony bottles, lift bags and other accessories.
* All edges are deburred to eliminate sharp edges and prevent abrasion to harness webbing.
* Two 3/8 slots along the bottom are designed to fit assembly screws for attaching accessories.
* 15.5 inches tall x 10.5 inches wide (39 cm x 27 cm)
* 1.5 lbs (0.68kg)
Hollis Aluminium Backplate
€ 103.02
Hollis Aluminium Backplate. - Aluminum Plate - 2lbs/ 0,91 kg aprox.
- Black Anodized 5052 Aluminum.
- Travelers Choice Stainless Plate - 5.5lbs.
- 316 Stainless.
- Hand Deburred and Electropolished.
Hollis Stainless Steel
€ 169.17
Hollis Stainless Steel. - Stainless Steel Backplate.
- Lower Corners Bent for a More Comfortable Fit.
- Deburred to Prevent any Strap or Bladder Wear.
- 1" & 2" Crotch Strap Slots.
- Cam Band Slots.
- Weight Stainless Steel: 5.5 lbs / 2,2 kg
Scubapro Backplate Stainless Steel
€ 139.52
Scubapro Backplate Stainless Steel. - This back plate features optimized stability.
- Ergonomic shape for maximum comfort and eliminates back stress on extended dives.
- Numerous options on where to attach storage pack and additional various accessories.
Scubapro Backplate Aluminium
€ 121.51
Scubapro Backplate Aluminium. This back plate features optimized stability.
Ergonomic shape for maximum comfort and eliminates back stress on extended dives.
Numerous options on where to attach storage pack and additional various accessories.
The perfect travel companion.
Maximum stability despite low weight.
